Prueba de Push-Out para Evaluar la Fuerza de Adhesión entre dos Tipos de Postes Estéticos

Posterior a un tratamiento endodóntico, muchas veces el remanente es insuficiente para la retención de un material de restauración, por este motivo es necesario la colocación de un sistema de poste-muñón para otorgar retención a la restauración final. Con la aparición de diversos materiales para las restauraciones estéticas, se utilizan actualmente resinas reforzadas con fibra de vidrio como sistemas de postes y muñones para la restauración de dientes tratados endodónticamente. El objetivo del presente trabajo fue comparar la fuerza de adhesión en la prueba push-out de dos diferentes tipos de postes de fibra de vidrio; 3M RelyX y Rebilda Post GT (VOCO) adheridos con cementos duales correspondientes a la marca de los postes; RelyX U-200® Automix (3M ESPE) y Rebilda DC (VOCO). Se llevó a cabo un análisis de ANOVA de dos vías para comparar la fuerza adhesiva con la prueba push-out entre ambos grupos de estudio. Pese a que se observó que los postes Rebilda presentaron una media de fuerza de adhesión ligeramente mayor en comparación con los postes 3M (sin diferencia estadística significativa P>0,05) los últimos son clínicamente más fáciles de colocar, lo cual pudiera ser un factor decisivo para el clínico en el momento de la elección de un poste y su sistema de adhesión.

After an endodontic treatment, many times the remnant is insufficient for the retention of a restorative material, for this reason it is necessary to place a post-stump system to provide retention to the final restoration. With the advent of various materials for esthetic restorations, fiberglass-reinforced resins are now used as post and core systems for the restoration of endodontically treated teeth. The objective of the present work was to compare the bond strength in the push-out test of 2 different types of fiberglass posts; 3M RelyX and Rebilda Post GT (VOCO) bonded with dual cements corresponding to the post brand; RelyX U-200® Automix (3M ESPE) and Rebilda DC (VOCO). A 2-way ANOVA analysis was performed to compare push-out strength between both study groups. Although it was observed that the Rebilda posts presented a slightly higher mean bond strength compared to the 3M posts (with no significant statistical difference P>0.05), the latter are clinically easier to place, which could be a decisive factor for the clinician at the time of choosing a post and its adhesion system.

Does microwave and hydrogen peroxide disinfection reduce Candida albicans biofilm on polymethyl methacrylate denture surfaces?

STATEMENT OF PROBLEM: Whether the disinfection of polymethyl methacrylate (PMMA) dentures eliminates Candida albicans biofilm is unclear. PURPOSE: The purpose of this in vitro study was to determine the antimicrobial effect of immersion in hydrogen peroxide (H2O2) and subsequent application of microwaves on the formation of C albicans biofilm on the surface of polished and unpolished PMMA disks. MATERIAL AND METHODS: Polished and unpolished PMMA disks (n=40) were mounted in a Center for Disease Control (CDC) biofilm reactor by adding yeast-dextrose-peptone (YPD) broth inoculated with C albicans in a cell suspension for 24 hours. After this period, the PMMA disks (n=8) were disinfected with 5 different solutions: saline solution, 1% sodium hypochlorite (NaOCl), H2O2, H2O2 microwaved at 650 W for 3 minutes (H2O2/µw), and distilled water microwaved at 650 W for 3 minutes (H2O/µw). On the polished and unpolished surface of each disk, arbitrary fluorescence units (AFU) were quantified with the live/dead bacterial viability kit (Invitrogen) by using confocal laser scanning microscopy (CLSM) to evaluate 10 different areas of each surface; these were counted as the colony-forming units (CFUs). The mean values were compared by using the Mann-Whitney U test (α=.05). RESULTS: Polished surfaces disinfected with H2O2/µw obtained the lowest viable cells (9.76 AFU) and nonviable cells (12.46 AFU) compared with H2O/µw and H2O2. In the unpolished surface the lowest mean values of viable cells (14.64 AFU) and nonviable cells (12.46 AFU) were obtained for the PMMA disks disinfected with H2O/µw compared with H2O2/µw and H2O2. Both polished and unpolished disks showed significant difference (P<.05) compared with the group of PMMA disks immersed in saline solution. No CFUs were detected in the polished or unpolished PMMA disks immersed in H2O2/µw or in NaOCl. CONCLUSIONS: H2O2 alone did not eliminate the formation of the biofilm of C albicans; however, in combination with the use of the microwave at 650 W for 3 minutes, the biofilm formation of C albicans on polished surfaces was reduced. The number of AFUs of viable-nonviable cells and CFUs depended on whether the surfaces are polished or unpolished.

Analysis of the Mechanical Behavior and Effect of Cyclic Fatigue on the Implant-Abutment Interface / Análisis del comportamiento mecánico y efecto de la fatiga cíclica en la interface implante-pilar

ABSTRACT: Purpose: The seal of the interface formed at the implant-abutment connection is essential for the long-term success of the implant-supported restoration. The aim of this study was to analyze the mechanical behavior and the effect of cyclic fatigue before and after in the marginal fit of implant-abutment according to the manufacturing technique of the abutment. Materials and methods: Machined titanium abutments (DENTIS), cast abutments with Nickel-Chromium alloy (VeraBond II), and manufacturing custom milled Zirconia abutments (Zirkonzahn) were evaluated. The implant-abutment assemblies were subjected to cyclic loads of 133 N at a frequency of 19.1 Hz for 200,000 cycles. The microgap was measured using Scanning Electronic Microscope and the distribution of compressive stress by the three-dimensional Finite Element (FE) method. Results: The microgap measurement values of the machined abutments were 1.62μm and 1.92μm, cast abutments were 14.14 μm, and 28.44 μm, and the milled abutments were 14.18μm and 20.15μm before and after cyclic fatigue, respectively. Only the cast abutments and the machined abutments showed a statistically significant difference before and after cyclic fatigue (p≤0.05). The FE analysis showed that the critical areas of compressive stress were located at the implant-abutment connection, increasing in the cast abutments and decreasing in the milled and the machined abutments. Conclusion: Cyclic fatigue exerts an effect on the dimensions of the microgap at the implant-abutment interface before and after loading; this microgap depends of the type of abutment material and the manufacturing technique.

RESUMEN: Propósito: El sellado de la interface de la conexión implante-pilar es esencial para el éxito a largo plazo de la restauración implantosoportada. El objetivo de este estudio fue analizar el comportamiento mecánico y el efecto de la fatiga cíclica antes y después en el sellado de la conexión implante-pilar de acuerdo a la ténica de fabricación del pilar. Materiales y Métodos: Pilares mecanizados de titanio (DENTIS), pilares calcinables colados con aleación Niquel-Cromo (VeraBond II) y pilares fresados de Zirconia (Zirkonzahn) fueron evaluados. Los implantes y pilares atornillados se sometieron a una carga de 133 N a una frecuencia de 19.1 Hz durante 200 000 ciclos. El microgap fue medido con el Microscopio Electrónico de Barrido y la distribución del esfuerzo de compresión por el método tridimensional de Elemento Finito (EF). Los valores del microgap de los pilares mecanizados fueron de 1.62μm y 1.92μm, en los pilares calcinables fue de 14.14μm y 20.15μm, y los pilares fresados fue de 14.18μm y 28.44 μm antes y después de la fatiga cíclica, respectivamente. Los pilares calcinables y lo mecanizados mostraron diferencia estadísticamente significativa antes y después de la fatiga cíclica (p≤0.05). El análisis por EF mostró que las áreas críticas del esfuerzo de compresión estaban localizadas en la conexión implante-pilar, aumentando en los pilares calcinables y disminuyendo en los pilares fresados y en los mecanizados. Conclusión: La fatiga cíclica ejerce un efecto sobre las dimensiones del microgap en la interface implante-pilar antes y después de la carga cíclica; este microgap depende del tipo de material y de la técnica de fabricación del pilar.

Evaluation of the Bond Strength and Marginal Seal of Indirect Restorations of Composites Bonded with Preheating Resin.

OBJECTIVE: Preheated resins (PR) are considered a cementing agent option for indirect adhesive restorations of composite inlays and onlays. The objective of this in vitro study was to evaluate the marginal sealing, adhesive interface, and microtensile bond strength of indirect adhesive restorations of composites in terms of dentin cemented with PR. MATERIALS AND METHODS: Standardized Class II preparations were performed on 30 extracted human premolars, impressions were taken, and indirect composite restorations were manufactured. In total, 15 restorations were cemented with PR (ENA HRi, SYNCA), and 15 restorations were cemented with self-adhesive resinous cement (RC) (Relyx U200, 3M ESPE), followed by a thermocycling regime. After that, these were segmented sagittally and longitudinally to evaluate the marginal sealing and the adhesive interface with scanning electron microscopy and confocal microscopy. Microtensile bond strength was assessed with a mechanical device (TA. XT Plus C, Stable Micro System). STATISTICAL ANALYSIS: Statistical analysis was conducted using the two-sample Student's t-test. RESULTS: The results showed that there is no statistically significant difference in the degree of microfiltration using PR or RC; however, microtensile bond strength is greater when the restoration is cemented with RC (278.75 N/cm3) than with PR (144.49 N/cm3), and better adjustment and sealing were observed for composite restorations with PR. CONCLUSION: PR comprise an alternative cementing agent for indirect composite restorations in Class II cavities in premolars.

Restorative Rehabilitation of a Patient with Generalized Non-Carious Cervical Lesions: Case Report / Rehabilitación restaurativa de un paciente con lesiones cervicales no-cariosas generalizadas: Reporte de un caso

ABSTRACT Non-Carious Cervical Lesions (NCCL) are a current problem of multifactorial origin that is associated with the loss of vertical occlusal dimension, hypersensitivity, loss of teeth, fractures, and many other pathologies that affect the masticatory function of the oral cavity. Identification of the etiological factors of NCCL comprises a key piece for the solution of the problem. Based on clinical scientific evidence related with the diagnosis, a restorative treatment must be planned according to the loss of dental structure in order to return function and aesthetics. The purpose of this case report was to describe a 54-year-old male patient who was diagnosed with generalized NCCL combined with occlusal vertical dimension loss. The protocol of the treatment process is described.

RESUMEN Las lesiones cervicales no cariosas (LCNC) son una problemática actual de origen multifactorial, la cual se ve asociada a la pérdida de dimensión vertical oclusal, hipersensibilidad, pérdida de dientes, fracturas y muchas otras patologías que afectan la función masticatoria de la cavidad bucal. La identificación de los factores etiológicos de las LCNC son piezas claves para la solución del problema. Basados en la evidencia científica clínica relacionado con el diagnóstico, se debe planificar un plan de tratamiento restaurativo que depende de la pérdida de la estructura dentaria para devolver la función y estética. El objetivo de este reporte de caso es describir a un paciente masculino de 54 años a quien se le diagnosticó LCNC generalizadas combinado con una pérdida de dimensión vertical oclusal. El protocolo de plan de tratamiento es descrito paso a paso.

Expression of enamel proteins in rough endoplasmic reticulum and golgi complex in human dental germs / Expresión de proteínas del esmalte en retículo endoplásmico rugoso y complexo golgiensis en gérmenes dentales humanos

Tooth enamel is the hardest tissue in the body. The organic matrix configuration is provided by the main proteins amelogenin, ameloblastin and enamelysin (MMP20), an enzyme that helps to shape the matrix. The aim of this study was to determine by histochemistry the expression of amelogenin and enamelysin through the rough endoplasmic reticulum in the late stages of amelogenesis, and its expression in the Complexus golgiensis (Golgi complex / Golgi apparatus) in the early stages in human fetuses. In early stages a colocalization of both proteins inside the Golgi apparatus was found, being more evident the relationship between Golgi and amelogenin (99.92 %). In the late stage, a colocalization of both proteins and rugged endoplasmic reticulum was found. With enamelysin being more evident in relation with rough endoplasmic reticulum (99.95 %). Our findings demonstrated the presence of amelogenin and enamelysin in odontoblast and ameloblast. However, the presence of these two proteins in odontoblast remains unknown.

El esmalte dental es el tejido más duro del cuerpo. La configuración de la matriz orgánica es proporcionada por las proteínas principales amelogenina, ameloblastina y enamelisina (MMP20), una enzima que ayuda a dar forma a la matriz. El objetivo de este estudio fue determinar mediante histoquímica la expresión de amelogenina y enamelisina a través del retículo endoplasmático rugoso en las últimas etapas de la amelogénesis , y su expresión en el Complexo golgiensis en las primeras etapas de formación en fetos humanos. En las primeras etapas se observó colocalización de ambas proteínas en el interior del Complexo golgiensis, siendo más evidente la relación entre Golgi y amelogenina (99,92 %). En la última etapa, se identificó una colocalización de ambas proteínas y retículo endoplásmico rugoso. Resulto más evidente la enamelisina en relación con el retículo endoplasmático rugoso (99,95 %). Nuestros resultados demostraron la presencia de amelogenina y enamelisina en odontoblastos y ameloblastos, sin embargo se desconoce la presencia de estas dos proteínas en odontoblastos.

Expression of Mmp-20 in dental germs of human fetus / Expresion de Mmp-20 en gérmenes dentales de fetos humanos

During experiments in animal studies, it has been observed that enamelysin (MMP-20) is expressed during tooth development in the late secretory stage of amelogenesis but not in the mature enamel.The aim of this research was to determine the location of MMP-20 in human tooth germs in the different structures of the enamel organ.The detection of MMP-20 was performed by immunohistochemistry in 20 specimens obtained from human fetuses. Immunostaining of MMP-20 was observed from the presecretor stadium in stellate reticulum and intermediate stratum and in the basal portion of ameloblasts in the secretory stage in stellate reticulum, stratum intermedium, secretory ameloblasts, odontoblasts and dental papilla. The results of this research show the location of MMP-20 in tooth germ development in humans and provides the foundation for future research about the process of dental organ formation.

En estudios realizados en animales de experimentación se ha observado que la enamelisina (MMP-20) se expresa durante el desarrollo dental durante el estadio de secreción tardío de la amelogénesis pero no en el esmalte maduro. El objetivo de la presente investigación fue determinar la localización de MMP-20 en gérmenes dentarios humanos en las diferentes estructuras del órgano del esmalte. Se analizaron 20 especímenes obtenidos de fetos humanos, efectuando la detección de MMP-20 por Inmunohistoquímica. Se observó inmunolocalización de MMP-20 desde el estadio presecretor en retículo estrellado y estrato intermedio, así como en porción basal de ameloblastos; en el estadio secretor en retículo estrellado, estrato intermedio, ameloblastos secretores, odontoblastos y papila dental. Los resultados de la presente investigación muestran la localización de la MMP-20 en el desarrollo del germen dentario en humanos y aporta las bases para futuras investigaciones acerca del proceso de formación de los órganos dentales.